IonoVit 0 for precision hole drilling

This new development by oelheld, a water-based medium which contains proper additives, guarantees the manufacturing of reproducible and high-quality holes for electrode diameters of 0,1 – 3,0 mm and larger.

IonoVit 0 is delivered ready-to-use. The brix-value is in a range of 5% - 7%. A dielectric aggregate (water treatment) is necessary, which is responsible for a good quality in cooperation with the mixedresin cartridge. The medium should be cooled as otherwise a steady performance cannot be reached.

Measuring device:

  • Refractometer 5% - 7% Brix (water down only with deionised water)
  • Conductivity meter: conductance 0 - 10 μS/cm
  • pH-value test strip 5 - 7

Peripheral requirement:
Water treatment

  • Dielectric aggregate with filter and deionised resin absolutely necessary
  • Integrate the cooling coil into the cooling system - recommended for reproducible quality (option) -
  • Good electrode quality (electrode with bar)

IonoVit 0 - Your benefits -

Steel machining

  • No corrosion formation
  • Free of heavy metal and chlorine compounds

Carbide machining

  • No visible cobalt leaching at bore entrance
  • Technological changes at the machine are not necessary
  • No machine soiling
  • Free of heavy metal and chlorine compounds

IonoVit S for fast hole drilling

IonoVit S is a high-performance dielectric designed for economic and fast working from an electrode diameter of 0,5 mm. It is also suitable for the processing of aluminum. Work pieces made of ferrous metals are temporarily protected from corrosion.

IonoVit S is a ready-to-use product. The concentration is regulated using a hand refractometer: The refractometer display for the ready-to-use IonoVit S is 7,0 % Brix.

Measuring device:

  • Refractometer 7% Brix (water down only with deionised water)

Peripheral requirement:
Water treatment

  • Dielectric aggregate with filter
  • Integrate the cooling coil into the cooling system - recommended for reproducible quality (option) -
  • Normal electrode quality is sufficient

IonoVit S - Your benefits -

  • Free of heavy metal and chlorine compunds
  • Low electrode wear
  • No foaming
  • Little time exposure during drilling
  • Temporary corrosion protection
  • Mild in odour

Distinction

Drill holes in steel and carbide (electrodes ø 1,5mm)


Electrode wear


Corrosion


Cleanness


Benefits of IonoVit S against deionised water / IonoVit 0


Benefits of IonoVit S against deionised water / IonoVit 0

Peripheral products

Water treatment

For the application of IonoVit 0 and IonoVit S a dielectric aggregate is required.

If none is included in the machine, the DA 60, can be used.

Important:
The recommended cooling guarantees a reproducible quality with both products.

The cooling coil is not included (option).


Refractometer

This measuring device is necessary to measure the concentration of these products and, if required, to adjust with deionised water.


pH-value test strips

The quality inspection of the water quality at IonoVit 0 takes place by using pH-value test strips.


Conductivity meter

When using IonoVit 0 a water conductance smaller than 10 μS/cm is required. At a value bigger than 10 μS/cm the resin cartridge has to be changed.


In our brochure you will find all information about IonoVit S and IonoVit 0, the longstanding development as well as the advantages of the product.

Download the brochure of IonoVit S and IonoVit 0

Contact

Phone: +49 711 168 63-0
Fax: +49 711 168 63-3500
E-mail: hutec(at)oelheld.de

company field
more elements
submit

News

28.08.2017

oelheld on EMO Hanover 2017

EMO Hanover

EMO 2017 is just around the corner...

oelheld U.S. - Online Shop

oelheld offers you the possibility to order your grinding oil or dilelectric in our new online shop.

more

TwitterYouTube