DiaPress ZHO - punch-, fine forge and forming oil

DiaPress ZHO is a high-performance deep drawing and forming oil suitable for extremely heavy forming work. It is free from chlorine, heavy metals and oil mist and has a high degree of ageing stability and good  viscosity/temperature properties. A very high pressure capacity is made possible by special friction-improving and EP additives. This product has good wetting and parting characteristics, pumping with gear pumps causes no problems. The finished pieces also have a basic rust protection.

DiaPress ZHO forming oil can be used for all most complicated deep drawing, fineedge blanking of high alloyed steel blanks up to 14 mm and also for many forming processes (e.g. forward rod extrusion, backward can extrusion, side extrusion, and bar, pipe and wire drawing) even for high alloyed and stainless steels. In many cases it is possible to use this oil instead of products containing chlorine.

DiaPress ZHO can be easily removed with all standard cleaning systems (aqueous alkaline, hydrocarbons, perchlorethene).

Technical facts

Norm

Density at +15 °C [g/cm³]

1,04

ASTM D 7042

Kin. viscosity at +40 °C [mm²/s]

160

ASTM D 7042

Flashpoint [°C]

> 180

DIN EN ISO 2719

Corrosive effect on copper

1

EN ISO 2160

In our brochure you will find all information about DiaPress ZHO, the longstanding development as well as the advantages of the product.

Download the brochure of DiaPress ZHO

Contact

Phone: +49 711 168 63-0
Fax: +49 711 168 63-3500
E-mail: hutec(at)oelheld.de

News

18.01.2018

Specialist for lubricants at GrindTec in Augsburg

GrindTec Augsburg

Are you looking for the right lubricant for your process? We have just that for you...

This website uses cookies

By using the site you agree to the use of cookies. For more details see our privacy policy

TwitterYouTube