DiaCut FD punching oil

Punching oil DiaCut FD has been especially developed for those punching processes where an evaporation without any residues is required. DiaCut FD prevents effectively the formation of built-up edges and allow for punching largely without burrs. It can also be used for simple forming and deep drawing processes. Special additives guarantee a good wetting of the workpiece and thus reduce effectively the tool wear.

DiaCut FD is suited for working with both copper alloys and non-ferrous metals until gauges of 2 mm and steel sheets of 1 mm. The surfaces will not discolour. With its low viscosity DiaCut FD evaporates very quickly leaving no residues behind.

DiaCut FD can be rolled, spread or sprayed onto the workpiece. It is free of chlorine, heavy metals and practically free of aromatic compounds and thus guarantees best health protection as well as greatest possible effectivity.

Technical facts

Norm

Density at +15 °C [g/cm³]

0,77

ASTM D 7042

Kin. viscosity at +20 °C [mm²/s]

2

ASTM D 7042

Evaporation range (Ether = 1)

85

DIN 53 170

Flashpoint [°C]

56

DIN EN ISO 2719

Corrosive effect on copper

1

EN ISO 2160

In our brochure you will find all information about DiaCut FD, the longstanding development as well as the advantages of the product. 

Download the brochure of DiaCut FD

Contact

Phone: +49 711 168 63-0
Fax: +49 711 168 63-3500
E-mail: hutec(at)oelheld.de

company field
more elements
submit

News

11.04.2017

Thanks for visiting us at Forge Fair

[Translate to english:] Stephan Hecht and Philipp Storr

A big THANK YOU to all who visited us at our booth at Forge Fair 2017.

oelheld U.S. - Online Shop

oelheld offers you the possibility to order your grinding oil or dilelectric in our new online shop.

more

TwitterYouTube