The Philosophy of grinding
oelheld offers grinding oils from low-end to high-end solutions on PAO-basis.
AquaTec water-soluble products
The well known disadvantages with water-soluble metalworking fluids (corrosion in machines and work pieces, sticky residues in machines, low tool life, fungi and bacteria development, etc.) had been for Dr. Storr and his research and development department the motivation to break new ground and to develop new products, that guarantee that most of the well known disadvantages will be a thing of the past.
With the new designed product line AquaTec we are able to offer you a product
that is solving most of the above mentioned disadvantages, is elevating your process stability and is reducing your ongoing costs at the same time.
- To enlarge the picture please click
In our brochure you will find all information about the AquaTec series, the longstanding development as well as the advantages of the product.
Product range water-soluble products
AquaTec 1548 was designed for machining works of non-ferrous metal, especially brass alloy.
AquaTec 1550 is a high-quality EP cooling lubricant with a medium-value mineral oil content.
AquaTec 3001 is a synthetic and miner oil free water-soluble EP cooling lubricant.
AquaTec 5001 is a high-quality mineral oil free cooling lubricant which was developed espially for grinding of carbide.
AquaTec 7000 is a high-quality and mineral oil free grining concentrate for ferrous metals.
AquaTec 7520 is a low-cost semisynthetic colling lubricant of high stability for general metal workings.
AquaTec 7537 is a semisynthetic cooling lubricant of high stability and was especially developed for the usage of hard mixing-water.
AquaTec 7539 is a high-quality semisynthetic cooling lubricant of high stability for general till heavy metal workings.
AquaTec 7560 was developed for the processing of steels, stainless steel, cast iron, non-ferrous metals and especially hard machinabilty silicon-based aluminium alloys.
Success stories:
AquaTec - A slovenian success story
The company CAJHEN REZILNA ORODJA D.O.O. in Lasko is the biggest tool producer in Slovenia...
AquaTec - A water soluble coolant is increasing the tool lifetime by 300%
The company HMP Heinrich Müller Maschinenfabrik GmbH from Germany has switched in December 2008 to the new water soluble coolant AquaTec 7560...
AquaTec is elevating the manufacturing process
For the cooling of the weld seam as well as for the cutting process the product AquaTec 7539 from oelheld GmbH is used...
AquaTec - Die Philosophie des Meisterschliffes
Hochwertige Messer und Scheren zu schleifen und evtl. auch eine komplette Instandsetzung fachgerecht zu erledigen ist eine Philosophie für sich und bedarf eines umfassend ausgebildeten Fachmannes/ Meisters...
AquaTec - The philosophy of grinding
Where others quit, the art of grinding starts for Titus Traber...
Instructions, measurement report, check list:
Measurement report - Water-soluble cooling lubricants
Please fill in here your measurements like concentration, pH-Value, total hardness etc...
Operating instruction - Water-soluble lubricants
Things you should mind by a initial filling and using water-soluble products ...
Check list - Water-soluble lubricants
Clear question for the ideal operation...
Your health benefits with AquaTec:
- AquaTec creates low mist levels
- AquaTec is dermatologically approved
- AquaTec provides superior stability for long sump life
- AquaTec contains no heavy metals
- AquaTec meets all requirements according REACh
Your benefits with AquaTec:
- Extreme long life without use of additional additives
- Reduced coolant maintenance
- No foam problems
- Universal use possible on single and centralised filtration systems
- High cleaning efficiency
- Low air pollution
- Good corrosion protection
- Improved tool life
- Better surface finish
